How to Calculate Edge Banding for Cabinet Doors213

Edge banding is an essential part of cabinet door construction. It provides a finished look to the edges of the door, protecting them from moisture and wear. When calculating the amount of edge banding you need, there are a few factors to consider:
The length of the door
The width of the door
The thickness of the edge banding
The overlap

Length of the Door

The length of the door is the most important factor to consider when calculating the amount of edge banding you need. To determine the length, measure the width of the door and multiply it by two. This will give you the total length of the edge banding needed for the top and bottom edges of the door.

Width of the Door

The width of the door is also an important factor to consider. To determine the width, measure the height of the door and multiply it by two. This will give you the total length of the edge banding needed for the left and right edges of the door.

Thickness of the Edge Banding

The thickness of the edge banding is also a factor to consider. Edge banding is available in a variety of thicknesses, so you will need to choose the thickness that is appropriate for your project. The most common thickness for cabinet doors is 1/2 inch.

Overlap

The overlap is the amount of edge banding that will overlap the edge of the door. The overlap is necessary to ensure that the edge banding is securely attached to the door. The most common overlap is 1/4 inch.

Calculating the Total Length of Edge Banding

Once you have considered all of the factors above, you can calculate the total length of edge banding you need. To do this, simply add the length of the door, the width of the door, and the overlap. For example, if you have a door that is 36 inches wide and 24 inches high and you are using 1/2 inch thick edge banding with a 1/4 inch overlap, you would need 72 inches of edge banding.

Installing Edge Banding

Once you have calculated the amount of edge banding you need, you can install it on the door. To do this, you will need a hot iron and a edge banding trimmer. First, apply a thin layer of glue to the edge of the door. Then, place the edge banding on the edge of the door and press it down with the hot iron. Finally, use the edge banding trimmer to trim off any excess edge banding.

2024-10-16

Previous：How to Edge Band with Super Thin Edge Banding

Next：How to Apply Edge Banding Manually: A Step-by-Step Guide for Cabinet Doors