How to Edge Band a Narrow Edge Using 468 Edge Banding202

If you're working with a narrow edge, you'll need to use a special type of edge banding called 468 edge banding. This type of edge banding is designed to be applied to edges that are less than 1/2 inch thick. It is made from a thin, flexible material that can be easily bent around curves. 468 edge banding is also available in a variety of colors and finishes, so you can find the perfect match for your project.

To apply 468 edge banding, you will need the following tools and materials:
468 edge banding
Edge banding trimmer
Hot melt glue
Glue gun
Sandpaper
Tack cloth

Once you have gathered your tools and materials, you can follow these steps to apply 468 edge banding to a narrow edge:
Cut the edge banding to the desired length. The edge banding should be slightly longer than the edge you are covering.
Apply hot melt glue to the back of the edge banding. Be sure to apply the glue evenly.
Press the edge banding onto the edge of the workpiece. Use your fingers or a roller to ensure that the edge banding is firmly adhered to the workpiece.
Trim the excess edge banding. Use an edge banding trimmer to trim the excess edge banding flush with the edge of the workpiece.
Sand the edge banding. Use sandpaper to smooth the edge banding and remove any rough edges.
Wipe the edge banding with a tack cloth. This will remove any dust or debris from the edge banding.

Your 468 edge banding is now complete! Enjoy the finished product.

2024-10-17

Previous：PVC Edge Banding Belongs to What Edge Banding?

Next：How to Edge Band a Rounded Corner