How to Install Veneer Edge Banding on Cabinets Using a Hand Held Router369

Veneer edge banding is a great way to add a finished look to your cabinets. It is a relatively easy process, but it does require some care and precision. Here are the steps on how to install veneer edge banding on cabinets using a hand held router:

Step 1: Gather Your Materials

You will need the following materials to install veneer edge banding on cabinets:* Veneer edge banding
* Hand held router
* Flush trim bit
* Straight edge guide
* Clamps
* Wood glue
* Sandpaper
* Tack cloth

Step 2: Prepare the Cabinet

The first step is to prepare the cabinet by cleaning the surface of the cabinet where the edge banding will be applied. Remove any dust or debris with a tack cloth.

Step 3: Apply the Veneer Edge Banding

The next step is to apply the veneer edge banding to the cabinet. Apply a thin layer of wood glue to the back of the edge banding and press it into place on the cabinet. Use clamps to hold the edge banding in place.

Step 4: Trim the Veneer Edge Banding

Once the veneer edge banding is in place, you need to trim it to the desired length. To do this, you will need to use a hand held router with a flush trim bit. Set the flush trim bit to the correct depth by measuring the thickness of the veneer edge banding.

Place the router against the edge of the cabinet and trim the veneer edge banding. Be sure to keep the router moving at a steady pace to avoid burning the veneer.

Step 5: Sand the Veneer Edge Banding

Once the veneer edge banding is trimmed, you will need to sand it to smooth the edges. Use a fine-grit sandpaper and sand the edges of the veneer edge banding until they are smooth to the touch.

Step 6: Finish the Cabinet

The final step is to finish the cabinet. You can apply a clear finish to the cabinet to protect the veneer edge banding and give it a polished look.

Tips for Installing Veneer Edge Banding on Cabinets

Here are a few tips for installing veneer edge banding on cabinets:* Use a sharp flush trim bit to trim the veneer edge banding. A dull bit can tear the veneer.
* Be sure to keep the router moving at a steady pace to avoid burning the veneer.
* Sand the edges of the veneer edge banding until they are smooth to the touch. This will help to create a seamless finish.
* Apply a clear finish to the cabinet to protect the veneer edge banding and give it a polished look.

.

2024-10-17

Previous：What Type of Edging Tape Looks Best for On-Site Edging?

Next：How to Edge Band a Door Panel (Video)