Edge Banding Machine Roundtable Edge Banding Strip Sealing Tutorial246

Edge banding is an essential part of furniture making, and it can be done using a variety of methods. One of the most common methods is to use an edge banding machine, which automatically applies a strip of banding tape to the edge of a workpiece.

Roundtable edge banding strips are a specific type of edge banding tape that is designed to create a smooth, rounded edge on a workpiece. They are typically made from PVC or ABS plastic, and they come in a wide variety of colors and finishes.

To apply roundtable edge banding strip using an edge banding machine, you will need the following tools and materials:* Edge banding machine
* Roundtable edge banding strip
* Adhesive
* Trimmer
* Sandpaper

Once you have gathered your tools and materials, you can follow these steps to apply roundtable edge banding strip to a workpiece:1. Prepare the workpiece. The workpiece should be clean and free of any dust or debris. The edge of the workpiece should also be straight and true.
2. Apply the adhesive. Apply a thin layer of adhesive to the edge of the workpiece. Make sure to apply the adhesive evenly, and do not get it on the surface of the workpiece.
3. Install the edge banding strip. Place the edge banding strip on the edge of the workpiece, and press it down firmly. Make sure that the strip is aligned properly, and that there are no gaps between the strip and the workpiece.
4. Trim the excess banding. Use a trimmer to trim the excess banding from the ends of the workpiece. Be careful not to trim too much, as this could damage the edge banding strip.
5. Sand the edge banding. Sand the edge banding smooth using sandpaper. Start with a coarse grit sandpaper, and then switch to a finer grit sandpaper to get a smooth finish.

By following these steps, you can easily apply roundtable edge banding strip to a workpiece using an edge banding machine. This will give your workpiece a professional-looking finish that will last for years to come.

Here are some additional tips for using an edge banding machine:* Use a sharp blade on your trimmer. A dull blade will tear the edge banding strip, and it will not create a smooth finish.
* Apply the adhesive evenly. If the adhesive is applied too thick, it will squeeze out from under the edge banding strip and create a mess. If the adhesive is applied too thin, the edge banding strip will not adhere properly to the workpiece.
* Press the edge banding strip down firmly. This will help to ensure that the strip adheres properly to the workpiece.
* Sand the edge banding smooth. Sanding the edge banding will help to remove any rough edges and create a smooth finish.

2024-10-17

Previous：Hand-Brushing Edge Banding Glue for Superior Furniture Finishing

Next：Laser Edge Banding Furniture Veneer Adhesive