How to Edge Band a 90-Degree Corner with Edge Banding35

Edge banding is a long, thin strip of material that is applied to the exposed edges of plywood, particleboard, and other wood-based panels. It serves several purposes, including protecting the edges from damage, improving the appearance of the panel, and providing a smooth and comfortable surface to the touch.

When edge banding a 90-degree corner, it is important to use a technique that will ensure a clean and professional-looking finish. The following steps will guide you through the process:

Step 1: Prepare the Materials

You will need the following materials:- Edge banding material
- Hot melt adhesive
- Edge bander machine
- Utility knife
- Sandpaper

Step 2: Cut the Edge Banding

Cut a piece of edge banding to the length of the edge you will be covering. Be sure to cut it slightly longer than the edge to allow for trimming later.

Step 3: Apply the Adhesive

Apply a thin, even layer of hot melt adhesive to the back of the edge banding. Be sure to cover the entire surface of the banding.

Step 4: Align the Edge Banding

Align the edge banding with the edge of the panel, making sure that the adhesive side is facing the panel. Press the banding firmly into place.

Step 5: Trim the Excess Banding

Once the edge banding is in place, use a utility knife to trim any excess banding that extends beyond the edge of the panel.

Step 6: Sand the Edge

Sand the edge of the panel to smooth the transition between the edge banding and the panel. Start with a coarse sandpaper and gradually work your way to a finer sandpaper.

Step 7: Finish the Edge

Apply a finish to the edge to protect it and enhance its appearance. You can use a clear lacquer, varnish, or polyurethane.

Tips for Success- Use a sharp utility knife to trim the edge banding. This will help to prevent the banding from tearing or splintering.
- Sand the edge of the panel in the direction of the grain. This will help to prevent the panel from becoming scratched or damaged.
- Apply several thin coats of finish to the edge. This will help to ensure a durable and long-lasting finish.

2024-10-18

Previous：[How To Remove Veneer Edge Banding]

Next：How to Apply Edge Banding in a Furniture Factory