How to Trim Edge Banding on Chinese Furniture342

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, MDF, or other wood panels. It serves both a functional and aesthetic purpose, protecting the core material from moisture damage and enhancing the overall appearance of the furniture.

When applying edge banding, it is important to trim the excess material that extends beyond the edge of the panel. This can be done using a variety of tools, including a utility knife, a router, or a power trimmer. Each tool has its own advantages and disadvantages, so the best choice for you will depend on your specific needs.

If you are using a utility knife, be sure to use a sharp blade and score the edge banding lightly before cutting. This will help to prevent the banding from chipping or tearing. To trim the banding, simply hold the knife at a 45-degree angle and run it along the edge of the panel. Be careful not to cut into the core material.

If you are using a router, you will need to use a bit that is slightly smaller than the thickness of the edge banding. To trim the banding, simply run the router along the edge of the panel, using a light touch. Be careful not to over-trim the banding, as this can weaken the joint.

If you are using a power trimmer, set the depth of cut to slightly less than the thickness of the edge banding. To trim the banding, simply run the trimmer along the edge of the panel, using a light touch. Be careful not to over-trim the banding, as this can weaken the joint.

Once you have trimmed the edge banding, you can sand the edges smooth using a fine-grit sandpaper. This will help to remove any burrs or sharp edges.

Here are some additional tips for trimming edge banding:
Use a sharp blade or bit.
Score the edge banding lightly before cutting.
Trim the banding at a 45-degree angle.
Be careful not to over-trim the banding.
Sand the edges smooth after trimming.

By following these tips, you can ensure that your edge banding looks neat and professional.

2024-10-19

Previous：How to Fold Edge Banding

Next：How Edgeband Trimming Bevel Impacts Furniture Aesthetics and Functionality