Can Edge Banding be Glued on Edge Banding?289

##
Edge banding is a thin strip of material that is applied to the edges of a substrate, such as plywood, MDF, or particleboard, to give it a finished look. Edge banding can be made from a variety of materials, including wood, plastic, and metal.
The most common method of applying edge banding is to use a hot melt adhesive. The adhesive is applied to the edge of the substrate, and the edge banding is then pressed into place. The heat from the adhesive melts the edge banding, causing it to bond to the substrate.
Another method of applying edge banding is to use a contact adhesive. Contact adhesives are applied to both the edge of the substrate and the back of the edge banding. The two surfaces are then pressed together, and the adhesive bonds them together.
Can edge banding be glued on edge banding? The answer is yes, but it is not recommended. Gluing edge banding on edge banding can create a weak bond that is prone to failure. The adhesive may not be able to properly bond to the two layers of edge banding, and the edge banding may eventually peel off.
If you need to apply edge banding to a surface that already has edge banding, it is best to remove the old edge banding before applying the new edge banding. This will ensure that you get a strong bond between the new edge banding and the substrate.


Here are some tips for applying edge banding:
* Make sure the edge of the substrate is clean and free of dust and debris.
* Apply a thin layer of adhesive to the edge of the substrate.
* Press the edge banding into place.
* Use a roller or a clamp to apply pressure to the edge banding.
* Allow the adhesive to dry completely before using the substrate.
By following these tips, you can ensure that your edge banding will be applied correctly and will last for many years to come.

2024-10-19

---

Previous：Can PVC Edge Banding Scraps Be Used to Make Edge Banding?

Next：Edge Banding Trimmer for a Seamless and Professional Finish