Edge Banding with Pre-Glued Edge Banding Video Tutorial240

In this video tutorial, we will guide you through the process of edge banding with pre-glued edge banding. Edge banding is a process of applying a thin strip of material to the exposed edges of a workpiece, such as a piece of plywood or MDF. This process helps to protect the edges from damage and moisture, and it can also improve the appearance of the workpiece.

There are two main types of edge banding: pre-glued and non-pre-glued. Pre-glued edge banding has a layer of adhesive already applied to one side, which makes it easier to apply than non-pre-glued edge banding. However, pre-glued edge banding can be more expensive than non-pre-glued edge banding.

In this tutorial, we will be using pre-glued edge banding. We will also be using a handheld edge bander, which is a machine that helps to apply the edge banding. If you do not have access to a handheld edge bander, you can also apply the edge banding by hand using a roller or a putty knife.

Before you begin, it is important to prepare the workpiece by sanding the edges smooth. This will help the edge banding to adhere properly.

Once the workpiece is prepared, you can begin applying the pre-glued edge banding. Start by peeling back a few inches of the backing paper from the edge banding. Then, align the edge banding with the edge of the workpiece and press it into place. Be sure to apply firm pressure to ensure that the edge banding adheres properly.

Once the edge banding is in place, you can trim the excess using a sharp knife. You can also sand the edge banding smooth if desired.

Pre-glued edge banding is a great way to protect the edges of your workpieces and improve their appearance. With a little practice, you can achieve professional-looking results with pre-glued edge banding.

Materials You'll Need* Pre-glued edge banding
* Handheld edge bander (optional)
* Sandpaper
* Sharp knife
* Roller or putty knife (optional)

Instructions1. Prepare the workpiece by sanding the edges smooth.
2. Peel back a few inches of the backing paper from the edge banding.
3. Align the edge banding with the edge of the workpiece and press it into place.
4. Trim the excess edge banding using a sharp knife.
5. Sand the edge banding smooth if desired.

Tips* For best results, use a handheld edge bander to apply the edge banding.
* If you do not have access to a handheld edge bander, you can also apply the edge banding by hand using a roller or a putty knife.
* Be sure to apply firm pressure when pressing the edge banding into place.
* Trim the excess edge banding using a sharp knife.
* Sand the edge banding smooth if desired.

2024-10-20

Previous：Can ABS Edging Strips Be Laser Edged?

Next：No More Edge Banding in Furniture Paneling?