Edge-banding Adhesive Didn‘t Work Well on Edge-banding309

I operate a furniture edge-banding factory in China. We use edge-banding adhesive to bond edge-banding strips to the edges of furniture panels. Our customers reported that the edge-banding was falling off, so we investigated the problem.

We found that the edge-banding adhesive was not sticking well to the edge-banding strips. We tried different types of edge-banding adhesive, but none of them worked well. We also tried different types of edge-banding strips, but the problem persisted.

We finally figured out the problem. The edge-banding adhesive was not sticking well to the edge-banding strips because the edge-banding strips were not properly cleaned. The edge-banding strips were contaminated with oil and dust, which prevented the edge-banding adhesive from sticking properly.

We solved the problem by cleaning the edge-banding strips with a solvent before applying the edge-banding adhesive. This allowed the edge-banding adhesive to stick properly to the edge-banding strips, and the edge-banding no longer fell off.

Here are some tips for cleaning edge-banding strips before applying edge-banding adhesive:
Use a clean cloth or paper towel to wipe down the edge-banding strips with a solvent.
Allow the edge-banding strips to dry completely before applying the edge-banding adhesive.
Apply the edge-banding adhesive to the edge-banding strips and press them firmly into place.
Allow the edge-banding adhesive to dry completely before using the furniture.

By following these tips, you can ensure that the edge-banding will stick properly to the edge-banding strips and will not fall off.

2024-10-21

Previous：90-Degree Wall Corner Edging Strips: A Comprehensive Guide

Next：Edge Banding Defect Detection: The Importance of Edge Banding Sensors