How to Edge Band a Stile368

Edge banding is a process of applying a thin strip of material to the edge of a substrate, such as wood or MDF. This process is typically used to cover the raw edge of the substrate, improve its appearance, and protect it from damage. Edge banding can be done using a variety of materials, including wood, plastic, and metal. In this article, we will focus on how to edge band a stile using a wood edge banding strip.

Materials:* Wood edge banding strip
* Wood glue
* Sandpaper
* Iron or edge banding machine
* Trimmer

Instructions:1. Prepare the stile. The first step is to prepare the stile by sanding the edge that you will be edge banding. This will help to create a smooth surface for the edge banding strip to adhere to.
2. Apply wood glue to the stile. Once the stile is sanded, you need to apply a thin layer of wood glue to the edge that you will be edge banding. Be sure to apply the glue evenly, and don't over apply it.
3. Position the edge banding strip. Once the glue is applied, you need to position the edge banding strip on the stile. Make sure that the strip is aligned properly and that it is flush with the edge of the stile.
4. Iron the edge banding strip. Once the edge banding strip is positioned, you need to iron it onto the stile. You can use a regular household iron or an edge banding machine. If you are using a regular household iron, be sure to use a low heat setting.
5. Trim the edge banding strip. Once the edge banding strip is ironed on, you need to trim it flush with the edge of the stile. You can use a sharp knife or a trimmer to do this.
6. Sand the edge banding strip. The final step is to sand the edge banding strip until it is flush with the surface of the stile. You can use a fine-grit sandpaper to do this.

Tips:* If you are using a wood edge banding strip that is thicker than 1/8 inch, you may need to use a router to create a rabbet in the edge of the stile. This will help to ensure that the edge banding strip is flush with the surface of the stile.
* You can use a variety of different types of wood glue to edge band a stile. However, it is important to choose a glue that is specifically designed for woodworking.
* Be sure to apply the glue evenly to the stile. If you over apply the glue, it will squeeze out from under the edge banding strip and create a mess.
* When ironing the edge banding strip, be sure to use a low heat setting. If you use too high of a heat setting, you may damage the edge banding strip or the stile.
* Trim the edge banding strip flush with the edge of the stile. This will help to ensure that the edge banding strip is not visible when the stile is installed.
* Sand the edge banding strip until it is flush with the surface of the stile. This will help to create a smooth and professional-looking finish.

By following these steps, you can easily edge band a stile and give it a professional-looking finish.

2024-10-21

Previous：Edge Banding on Wood: How-To Guide

Next：How to Seal Carpet Edge Strips: A Visual Guide