[Post-Edging Absence of Glue on Top of Edging Tape]255

Dear Valued Customer,

As a leading Chinese manufacturer of furniture edge banding, we are writing to address a recent concern regarding the absence of glue on the top surface of our edging tape after the edging process.

We understand the importance of ensuring a strong and durable bond between the edging tape and the substrate. To this end, we have implemented rigorous quality control measures throughout our production process and have employed state-of-the-art adhesives specifically formulated for furniture applications.

However, in the unlikely event that you encounter an instance where glue is not present on top of the edging tape after edging, we would like to assure you that this is likely due to a minor oversight during the application process.

Possible Causes of Glue Absence:

Insufficient Glue Application: The glue extruder may have been improperly set, resulting in insufficient glue being applied to the tape.
Uneven Glue Distribution: The glue roller may not have been properly adjusted, leading to uneven glue distribution on the tape.
Excessive Edge Thickness: If the edge thickness of the substrate exceeds the recommended range for our edging tape, it may prevent proper glue penetration and adhesion.
Substrate Contamination: Oil, dust, or other contaminants on the substrate surface can hinder glue adhesion.
Environmental Factors: Extreme temperatures or humidity levels can affect the curing time of the glue, leading to insufficient bonding.

Recommended Action:

If you observe an absence of glue on the top surface of the edging tape, we recommend the following actions:
Check the Glue Extruder: Ensure that the glue extruder is properly set and calibrated to deliver the appropriate amount of glue.
Inspect the Glue Roller: Adjust the glue roller to ensure even glue distribution on the tape.
Check Substrate Thickness: Verify that the edge thickness of the substrate meets the specifications for our edging tape.
Clean the Substrate: Remove any contaminants from the substrate surface to promote proper glue adhesion.
Control Environmental Conditions: Maintain the appropriate temperature and humidity levels in the production environment.
Apply Additional Glue: If necessary, carefully apply a small amount of additional glue to the top surface of the edging tape using a brush or syringe.

By following these steps, you can ensure a strong and durable bond between the edging tape and the substrate. We are committed to providing our customers with high-quality products and exceptional support. Should you have any further questions or concerns, please do not hesitate to contact us.

Thank you for your continued partnership.

Sincerely,

The [Factory Name] Team

2024-10-21

---

Previous：Edge Banding for Machine Edging: A Comprehensive Guide

Next：Laser Edge Banding for Furniture: Unlocking Precision and Efficiency