Why is Edge Banding Glue Too Little?392

Edge banding is a process of applying a thin strip of material to the exposed edges of a substrate, such as plywood or particleboard. The purpose of edge banding is to protect the substrate from moisture and wear, and to improve its appearance. One of the most important aspects of edge banding is the application of glue to the back of the edge banding strip. If too little glue is applied, the edge banding may not adhere properly to the substrate, which can lead to a number of problems.

There are a few reasons why too little glue may be applied to edge banding. One possibility is that the glue spreader is not set correctly. The glue spreader is a machine that applies glue to the back of the edge banding strip. If the spreader is not set correctly, it may not apply enough glue to the strip. Another possibility is that the glue is too thick. If the glue is too thick, it may not flow evenly onto the strip. Finally, the glue may be old or dried out. If the glue is old or dried out, it may not adhere properly to the strip.

There are a number of problems that can occur if too little glue is applied to edge banding. One problem is that the edge banding may not adhere properly to the substrate. This can lead to the edge banding peeling off or becoming loose. Another problem is that the edge banding may not protect the substrate from moisture and wear. This can lead to the substrate becoming damaged or discolored.

If you are experiencing problems with edge banding that is not adhering properly, you should check the following:
1. The glue spreader is set correctly.
2. The glue is not too thick.
3. The glue is not old or dried out.

If you have checked all of these things and you are still experiencing problems, you may need to contact a professional for assistance.

2024-10-21

Previous：Not-So-Perfect Partnerships: The Mismatch Between Edgebanding Glue and Edgebanding

Next：Automated Edge Banding: Is Edge Banding Necessary?