How to Replace Old Veneer with Fresh Veneer13

Veneer is a thin layer of wood that is applied to the surface of another material, such as wood, metal, or plastic. Replacing old veneer with new veneer is a relatively simple process that can be done in a few hours. Here are the steps on how to do it:

1. Remove the old veneer
The first step is to remove the old veneer. This can be done using a heat gun or a chemical stripper. If you are using a heat gun, be careful not to damage the underlying material. If you are using a chemical stripper, follow the manufacturer's instructions carefully.

2. Prepare the surface
Once the old veneer has been removed, you need to prepare the surface for the new veneer. This involves sanding the surface smooth and removing any dust or debris.

3. Apply the new veneer
The next step is to apply the new veneer. This can be done using a contact cement or a pressure-sensitive adhesive. If you are using a contact cement, apply it to both the surface and the veneer. If you are using a pressure-sensitive adhesive, apply it only to the veneer.

4. Press the veneer into place
Once the adhesive has been applied, press the veneer into place. Use a roller or a press to ensure that the veneer is evenly bonded to the surface.

5. Trim the veneer
Once the veneer has been bonded to the surface, you need to trim it to size. This can be done using a utility knife or a veneer saw.

6. Finish the veneer
The final step is to finish the veneer. This can be done by sanding it smooth and applying a clear finish.

Replacing old veneer with new veneer is a relatively simple process that can be done in a few hours. By following the steps in this guide, you can achieve a professional-looking finish.

2024-10-22

Previous：What Thickness of Edge Banding to Use for Diamond Edging

Next：How to Edgeband Four Sides with One Strip