How to Edge Band Particleboard with Iron-On Edge Banding360

Particleboard is a widely used material in furniture making and other woodworking projects. It is an engineered wood product that is made up of wood chips and particles that are bonded together with a resin. Particleboard is a relatively inexpensive and lightweight material that is easy to work with. However, it can be difficult to get a clean and professional-looking finish on particleboard edges. This is where iron-on edge banding comes in.

Iron-on edge banding is a thin strip of wood or plastic that is coated with a heat-activated adhesive. The adhesive is activated when the edge banding is pressed against the edge of the particleboard with a heated iron. This creates a strong bond between the edge banding and the particleboard, resulting in a clean and professional-looking finish.

To edge band particleboard with iron-on edge banding, you will need the following materials:
Particleboard

Iron-on edge banding

Heated iron

Edge banding trimmer

Sandpaper or sanding block

Once you have gathered your materials, you can follow the steps below to edge band your particleboard:1. Cut the edge banding to length. The edge banding should be slightly longer than the edge of the particleboard.
2. Apply a thin layer of glue to the edge of the particleboard. This will help to hold the edge banding in place while you are applying it.
3. Position the edge banding on the edge of the particleboard. Make sure that the edge banding is flush with the edge of the particleboard.
4. Press the heated iron on the edge banding. Hold the iron in place for several seconds, or until the adhesive is activated.
5. Trim the excess edge banding with an edge banding trimmer.
6. Sand the edge of the particleboard to smooth out the transition between the edge banding and the particleboard.

With a little practice, you can get great results when edge banding particleboard with iron-on edge banding. This is a relatively simple and inexpensive way to give your particleboard projects a clean and professional-looking finish.

2024-10-22

Previous：How to Edge Band a Cabinet Door: A Step-by-Step Video Guide

Next：How to Install Aluminum Edge Banding for a Perfect Rounded Corner