How to Edge Band a Wide Wardrobe144

Step 1: Prepare the materials
You will need the following materials:
- Wardrobe panel
- Edge banding
- Trimming router
- Edge banding trimmer
- Sandpaper
- Measuring tape
- Pencil
- Iron

Step 2: Cut the edge banding to length
Measure the length of the edge of the wardrobe panel and cut the edge banding to the same length. Add about 2 inches of extra banding at each end for trimming.

Step 3: Apply the edge banding to the panel
Place the edge banding on the edge of the panel and align it with the edge. Use an iron to melt the glue on the back of the banding and press it onto the panel. Hold the iron in place for about 10 seconds to ensure a secure bond.

Step 4: Trim the excess banding
Use a trimming router to trim the excess banding at both ends of the panel. Be careful not to cut into the panel itself.

Step 5: Sand the edge
Sand the edge of the banding to smooth it out. Use a fine-grit sandpaper to avoid scratching the finish.

Step 6: Repeat the process for the other edges
Repeat Steps 2-5 for the other edges of the wardrobe panel.

Here are some additional tips for edge banding a wide wardrobe:
- Use a sharp router bit to get a clean cut.
- If you are using a manual router, be sure to clamp the panel down securely.
- Apply the edge banding in multiple passes if necessary.
- Wipe off any excess glue with a damp cloth.

Edge banding is a great way to add a professional-looking finish to your wardrobe. By following these steps, you can easily edge band a wide wardrobe in no time.

2024-10-22

Previous：Invisible Groove Edge Banding: How to Achieve a Seamless Finish

Next：How to Edge Band Furniture Like a Pro