How to Edge Band an Inside Corner258

As a leading manufacturer of edge banding in China, we are often asked how to edge band an inside corner. Here is a step-by-step guide to help you achieve professional-looking results.

Supplies You'll Need:* Edge banding material
* Iron or edge bander
* Flush trim bit
* Router
* Sandpaper

Step 1: Preparing the Edge Banding* Cut the edge banding to the desired length.
* If using a pre-glued edge banding, apply heat to the adhesive with an iron or edge bander.

Step 2: Positioning the Edge Banding* Align the edge banding with the edge of the workpiece.
* Make sure the edge banding is flush with the surface of the workpiece.

Step 3: Applying the Edge Banding* Use an iron or edge bander to press the edge banding onto the workpiece.
* Apply firm pressure to ensure a secure bond.

Step 4: Trimming the Excess Edge Banding* Use a flush trim bit to trim the excess edge banding flush with the surface of the workpiece.
* Be careful not to damage the workpiece.

Step 5: Sanding the Edge Banding* Sand the edge banding smooth using fine-grit sandpaper.
* This will remove any sharp edges and create a finished look.

Tips for Edge Banding Inside Corners* Use a thin edge banding material for inside corners. This will help it bend easily around the corner.
* Apply heat to the edge banding before bending it around the corner. This will make it more pliable.
* Use a radius block to help the edge banding conform to the shape of the corner.
* Clamp the edge banding in place while it cools. This will help prevent it from lifting off the workpiece.
* Be patient and take your time. It may take a few tries to get the perfect fit.

ConclusionWith a little practice, you can easily edge band inside corners like a professional. By following the steps outlined in this guide, you can achieve beautiful and durable results.

2024-10-22

Previous：How to fix broken edge binding on Chinese furniture

Next：How to Use Woodworking Edge Banding Tape