How to Apply Metal Edge Banding to Plywood237

Metal edge banding is a thin strip of metal that is applied to the edges of plywood to protect them from damage. It is a popular choice for furniture and other wood products because it is durable, easy to clean, and can add a touch of style. There are two main types of metal edge banding: T-molding and U-channel. T-molding is a single piece of metal that is folded over the edge of the plywood, while U-channel is a two-piece system that consists of a base channel and a cap.

To apply metal edge banding, you will need the following tools and materials:* Metal edge bandingAdhesiveClampsRouterFlush trim bitSandpaper

Once you have gathered your tools and materials, you can follow these steps to apply metal edge banding to plywood:1.

Clean and dry the edges of the plywood. This will help the adhesive to bond properly.2.

Apply a thin layer of adhesive to the edges of the plywood. Use a brush or roller to apply the adhesive evenly.3.

Place the metal edge banding on the edge of the plywood. Make sure that the edge banding is aligned with the edge of the plywood.4.

Clamp the edge banding in place. Use clamps to hold the edge banding in place while the adhesive dries.5.

Route the edge banding. Use a router with a flush trim bit to trim the edge banding flush with the surface of the plywood.6.

Sand the edge banding. Use sandpaper to smooth the edges of the edge banding.

Your metal edge banding is now installed! Enjoy the added protection and style that it provides.

Here are some additional tips for applying metal edge banding:* Use a sharp router bit. A dull bit will tear the edge banding.Route slowly and carefully. Rushing the process can cause the edge banding to chip or break.Sand the edge banding thoroughly. This will help to create a smooth, professional-looking finish.Apply a clear finish to the edge banding. This will help to protect it from wear and tear.

With a little care and attention, you can easily apply metal edge banding to plywood. This versatile material can add protection, style, and durability to your wood products.

2024-10-23

Previous：How to Edge Band with 50mm Edge Banding

Next：How to Solve the Problem: Wood Door Edge Banding Not Sealing Properly