How to Seal Recessed Edge Banding on Furniture330

Recessed edge banding is a popular technique used to create a seamless and professional-looking finish on furniture and cabinetry. By embedding the edge banding into a groove or recess, it becomes practically invisible, enhancing the overall aesthetic of the piece. While the process may seem complex, achieving this finish is relatively straightforward with the right tools and materials.

To seal recessed edge banding effectively, follow these steps:

1. Prepare the Surface

Ensure that the surface where the edge banding will be applied is clean, dry, and free of any dust or debris. Rough edges should be sanded smooth to create an even surface.

2. Create the Groove

Using a router, cut a groove along the edge of the surface where the edge banding will be inserted. The groove should be slightly narrower and shallower than the thickness of the edge banding.

3. Apply Adhesive

Apply a thin layer of solvent-based contact adhesive to both the groove and the underside of the edge banding. Allow the adhesive to become slightly tacky before proceeding.

4. Insert the Edge Banding

Carefully insert the edge banding into the groove, aligning it flush with the surface. Use a rubber mallet or a roller to firmly press the edge banding into place, ensuring that it is fully seated in the groove.

5. Secure the Edge Banding

Use a series of brad nails or staples to secure the edge banding to the surface. Space the nails or staples approximately every 6-8 inches apart. countersink the nails slightly below the surface to avoid creating protrusions.

6. Trim the Excess

Once the edge banding is secured, use a sharp utility knife or trimming router to remove any excess material overhanging the edge.

2024-10-23

Previous：How to Mitre Porcelain Tile Edging: A Comprehensive Guide

Next：How to Align Perfectly When Rounding Edge Banding