How to Use a Corner Scraper to Trim Edge Banding36

Edge banding is a material that is applied to the edges of panels, such as plywood or MDF, to create a finished look and protect the core material from moisture and wear. It is typically made of PVC, ABS, or wood veneer, and comes in a variety of colors and finishes to match the décor of the furniture or cabinetry.

When applying edge banding, it is important to ensure that the edges of the banding are flush with the surface of the panel. This can be achieved using a corner scraper, which is a handheld tool with a sharp blade that is used to shave excess banding away.

Steps
Wear gloves and safety glasses to protect your hands and eyes from the sharp blade.
Hold the corner scraper with your dominant hand, and place the blade against the edge of the banding.
Pull the corner scraper towards you, using long, even strokes.
As you scrape, keep the blade parallel to the surface of the panel, and apply moderate pressure.
Continue scraping until the edge of the banding is flush with the surface of the panel.
If the blade becomes dull, use a file to sharpen it.
Wipe away any dust or debris with a clean cloth.

Tips* Use a sharp blade for best results.
* Hold the corner scraper at a slight angle to the surface of the panel to avoid gouging the wood.
* Use moderate pressure to avoid tearing the banding.
* If the banding is particularly thick, you may need to make several passes with the corner scraper.
* Be careful not to cut yourself with the blade.

ConclusionUsing a corner scraper is a quick and easy way to trim edge banding flush with the surface of a panel. By following the steps and tips above, you can achieve professional-looking results.

2024-11-06

Previous：How to Remove Veneer Tape

Next：How to Repair Detaching Veneer Edge Banding in Chinese Furniture