How to Make Edge Banding Strips for Doors294

Edge banding strips are an important part of any door. They help to protect the door from damage, and they can also add a decorative touch. If you are looking for a way to make your own edge banding strips, here is a step-by-step guide.

Materials* 1/4" thick plywood or MDF
* Wood glue
* Edge banding tape
* Iron
* Utility knife
* Sandpaper

Instructions1. Cut the plywood or MDF to the desired length and width.
2. Apply a thin layer of wood glue to one edge of the plywood or MDF.
3. Apply the edge banding tape to the glued edge.
4. Use an iron to heat the edge banding tape and press it down firmly.
5. Trim the excess edge banding tape with a utility knife.
6. Sand the edges of the edge banding strip to smooth them out.

Tips* Use a sharp utility knife to trim the excess edge banding tape. This will help to prevent the tape from fraying.
* If you are using a dark-colored edge banding tape, it is important to sand the edges of the strip before applying it to the door. This will help to prevent the tape from showing through the finish.
* You can add a decorative touch to your edge banding strips by painting them or staining them.

Edge Banding MachineIf you are making a lot of edge banding strips, you may want to consider investing in an edge banding machine. This machine will make the process of applying edge banding tape much easier and faster.

ConclusionMaking your own edge banding strips is a relatively easy and inexpensive project. By following the steps in this guide, you can create custom edge banding strips that will add a touch of style to your doors.

2024-11-09

Previous：How to Blacken Wood Edge Banding

Next：What Types of Furniture Edging Are Available?