How to Fix Loose Edge Banding on Wooden Doors136

Edge banding is a thin strip of material that is applied to the edges of a wooden door to cover the exposed core and protect it from moisture and damage. Over time, edge banding can become loose and fall off, leaving the door looking unsightly and vulnerable to damage. If the edge banding on your wooden door has come loose, there are a few simple steps you can take to fix it.

What You'll Need:* A utility knife
* A sanding block
* A solvent (such as acetone or denatured alcohol)
* A clean cloth
* Contact cement
* A hair dryer

Instructions:1. Use a utility knife to carefully score the edge of the loose edge banding.
2. Use a sanding block to sand the scored edge of the edge banding.
3. Apply a thin coat of solvent to the sanded edge of the edge banding and to the corresponding surface on the wooden door.
4. Allow the solvent to dry for a few minutes until it becomes tacky.
5. Apply a thin coat of contact cement to the sanded edge of the edge banding and to the corresponding surface on the wooden door.
6. Allow the contact cement to dry for a few minutes until it becomes tacky.
7. Carefully align the edge banding with the edge of the wooden door and press it into place.
8. Use a hair dryer to heat the edge banding and help it to adhere to the wooden door.
9. Hold the edge banding in place for a few minutes until the contact cement has cured.

Tips:* If the loose edge banding is very thin, you may need to use two or three layers of contact cement to get it to adhere properly.
* Be careful not to apply too much contact cement, as this can cause the edge banding to become discolored.
* If the contact cement gets on your skin, wash it off immediately with soap and water.
* Allow the contact cement to cure completely before using the door.

Conclusion:Fixing loose edge banding on wooden doors is a relatively simple process that can be completed in a few minutes. By following the steps outlined above, you can restore your door to its original condition and protect it from damage.

2024-11-12

Previous：What You Need to Know About Grooving Edge Banding

Next：What is Edge Banding? A Comprehensive Guide