How to Replace Edge Banding314

Edge banding is a decorative and protective strip of material applied to the exposed edges of your furniture. Over time, however, even the most durable edge banding can become dented, cracked, or peeled. When this happens, it's necessary to replace the old edge banding with new material.

Replacing edge banding is a relatively simple task that can be completed in just a few hours. With the right materials and tools, you can make your furniture look like new again.

Materials Needed:
New edge banding
Wood glue
Primer
Paint or stain (optional)
Sandpaper or sanding block
Utility knife
Iron or heat gun
Edge banding cutter

Instructions:

1. Remove the old edge banding. Use a utility knife to carefully score the edge banding along the edge of the furniture. Then, use a heat gun or iron to soften the glue and carefully peel off the old edge banding.

2. Prepare the surface of the furniture. Sand the edge of the furniture to remove any remaining adhesive or debris. Prime the surface with a thin layer of wood glue, then allow it to dry.

3. Apply the new edge banding. Apply a thin layer of wood glue to the back of the new edge banding, then align it with the edge of the furniture. Press the edge banding firmly into place and hold it for a few minutes until the glue sets.

4. Trim the edge banding. Use a sharp utility knife to trim the edge banding flush with the edge of the furniture. Then, use an edge banding cutter to round the edges of the edge banding.

5. Sand the edge banding. Sand the edge banding lightly to smooth out any rough edges. Then, prime and paint or stain the edge banding to match the finish of your furniture.

Tips:
When choosing a new edge banding, be sure to select a material that is compatible with the type of furniture you have.
If the edge of the furniture is not perfectly straight, you can use a heat gun or iron to soften the edge banding and bend it into place.
Be careful not to apply too much glue to the edge banding, as this can cause it to bulge or wrinkle.
If you are not confident in your ability to replace the edge banding yourself, you can always hire a professional to do it for you.

2024-11-14

Previous：How to Fix Loose Edge Banding: A Comprehensive Guide for Furniture Factories

Next：How to Code Edge Banding in a Chinese Furniture Factory