How to Make a Plywood Edge Banding Frame for a Workbench81

A plywood edge banding frame is a simple but effective way to add strength and durability to your workbench. It is also a great way to use up scrap plywood. Here are the steps on how to make one:

Materials:* 3/4-inch plywood
* 1x4 pine boards
* Wood glue
* 1-1/4-inch brad nails
* Miter saw
* Circular saw
* Drill
* Countersink bit
* Clamps

Instructions:1. Cut the plywood to size. The first step is to cut the plywood to the size of your workbench top. If your workbench is 24 inches wide by 48 inches long, then you will need to cut the plywood to 24 inches by 48 inches.
2. Cut the 1x4 pine boards to length. Next, you will need to cut the 1x4 pine boards to length. The length of the boards will depend on the size of your workbench top. For a 24-inch wide by 48-inch long workbench, you will need to cut the boards to 24 inches long.
3. Assemble the frame. Once the plywood and the 1x4 pine boards are cut to size, you can begin assembling the frame. Start by applying a bead of wood glue to the edge of the plywood. Then, place the 1x4 pine boards on the plywood, flush with the edge. Secure the boards with 1-1/4-inch brad nails.
4. Reinforce the corners. Once the frame is assembled, you can reinforce the corners with angle brackets. This will help to keep the frame square and prevent it from racking.
5. Attach the frame to the workbench top. Once the frame is reinforced, you can attach it to the workbench top. To do this, simply apply a bead of wood glue to the bottom of the frame and then place it on the workbench top. Secure the frame with 1-1/4-inch brad nails.

Your plywood edge banding frame is now complete! This frame will help to protect your workbench top from damage and will also make it more durable. Enjoy your new workbench!

2024-11-30

Previous：How Edge Banding is Made: A Comprehensive Guide

Next：Which Type of Edge Banding is Safe?