How to Trim Edge Banding Strips from the Side272

Edge banding strips are a thin strip of material that is applied to the exposed edges of boards or panels to give them a finished look. They are typically made of plastic, wood, or metal and can come in various profiles, including straight, bullnose, and ogee. In this guide, we will focus on how to trim edge banding strips from the side.

Materials and Tools Required* Edge banding strips
* Utility knife or flush trim bit
* Measuring tape
* Pencil
* Sandpaper or sanding block
* Heat gun (optional)

Trimming the Edge Banding Strip1. Measure and Mark: Determine the length of the edge banding strip needed for the project and mark it on the strip with a pencil. Use a measuring tape to ensure accuracy.
2. Score the Edge: Using a sharp utility knife, carefully score the edge of the strip where you marked it. Do not cut all the way through the material. This will weaken the edge and make it easier to trim.
3. Bend and Snap: Bend the strip along the scored line and hold it in place for a few seconds. This will help create a clean break. Slowly and carefully snap the strip at the scored line.
4. Trim the Edge: Use a flush trim bit or utility knife to trim any excess material from the edge of the strip. Ensure that the edge is even and flush with the surface of the board.
5. Sand the Edge: Smooth out any rough edges or imperfections on the trimmed edge using sandpaper or a sanding block.
6. Apply Heat (Optional): For stronger adhesion, apply heat to the edge banding strip using a heat gun. This will soften the adhesive and create a better bond to the surface.

Tips for Trimming Edge Banding Strips from the Side* Use a sharp utility knife or flush trim bit for precise cuts.
* Score the edge deeply enough to create a clean break.
* Bend the strip slowly and carefully to avoid breaking it prematurely.
* Trim any excess material in small increments to achieve a flush fit.
* Use sandpaper with a fine grit to smooth out the trimmed edge.
* Apply heat to the edge banding strip before applying it for a more secure bond.

2024-12-13

Previous：Edge Banding How To - A Complete Video Guide

Next：What Size Edge Banding Trimmer Bit to Use?