How to Install Cabinet Edge Banding112

Edge banding is a thin strip of material that is applied to the edges of wood panels to create a finished look and protect the panel from damage. It is commonly used on kitchen cabinets, furniture, and other woodworking projects. Edge banding can be made from a variety of materials, including wood, plastic, and metal. The most common type of edge banding is made from PVC (polyvinyl chloride).

Installing edge banding is a relatively simple process, but it does require some precision and attention to detail. The following steps will guide you through the process of installing edge banding on your kitchen cabinets.

Materials and Tools* Edge banding
* Wood glue
* Edge banding trimmer
* Flush trim bit
* Router
* Sandpaper
* Clean cloth

Instructions1. Prepare the edge of the cabinet. The edge of the cabinet should be clean and free of any dirt or debris. If the edge is rough, you can sand it smooth with a piece of sandpaper.
2. Apply wood glue to the edge of the cabinet. Use a thin, even coat of wood glue to the entire length of the edge.
3. Apply the edge banding. Line up the edge banding with the edge of the cabinet and press it into place. Make sure that the edge banding is flush with the surface of the cabinet.
4. Trim the excess edge banding. Use an edge banding trimmer to trim the excess edge banding from the ends of the cabinet.
5. Flush trim the edge banding. Use a flush trim bit and a router to flush trim the edge banding with the surface of the cabinet.
6. Sand the edge banding. Sand the edge banding smooth with a piece of sandpaper.
7. Clean the edge banding. Wipe the edge banding clean with a clean cloth.

Tips* Use a sharp edge banding trimmer and flush trim bit. This will help to ensure a clean, professional-looking finish.
* Be careful not to apply too much wood glue. Too much glue can cause the edge banding to bubble and peel.
* Allow the wood glue to dry completely before trimming the excess edge banding. This will help to prevent the edge banding from cracking or splitting.
* If you are installing edge banding on a large cabinet, you may want to use a helper to hold the edge banding in place while you apply the wood glue and press it into place.

2024-12-13

Previous：Which Furniture Edge Banding Trimming Method Is the Best?

Next：How to Trim Wood Veneer Edge Banding