Edgebanding Too Thick? It‘s Costing You More Than You Think86

As a leading manufacturer of edgebanding in China, we've seen our fair share of edgebanding issues. One of the most common problems we see is edgebanding that is too thick. This can lead to a number of problems, including:
Difficulty trimming the edgebanding
Increased risk of chipping or breaking the edgebanding
Poor adhesion to the substrate
Reduced durability of the finished product

In this article, we'll discuss the problems caused by edgebanding that is too thick and provide some tips on how to avoid these problems.

Why is Edgebanding Too Thick?

There are a few reasons why edgebanding might be too thick. The most common reason is that the edgebanding was not properly calibrated. Calibration is the process of adjusting the thickness of the edgebanding so that it matches the thickness of the substrate. If the edgebanding is not properly calibrated, it will be too thick and will cause the problems listed above.

Another reason why edgebanding might be too thick is that it was not made from the correct material. Some materials, such as PVC, are naturally thicker than others, such as wood veneer. If you are using a material that is too thick, it will be difficult to trim and will be more likely to chip or break.

How to Avoid Using Edgebanding That is Too Thick

There are a few things you can do to avoid using edgebanding that is too thick:
Specify the correct thickness when ordering edgebanding. The thickness of the edgebanding should match the thickness of the substrate.
Use a high-quality edgebanding that is made from the correct material. PVC edgebanding is a good option for most applications because it is durable and easy to trim.
Calibrate the edgebanding before using it. This will ensure that the edgebanding is the correct thickness and will help to prevent problems during application.

If You Have Edgebanding That is Too Thick

If you have edgebanding that is too thick, there are a few things you can do:
Trim the edgebanding down to the correct thickness. This can be done with a sharp knife or a sanding block.
Use a thinner adhesive. This will help to reduce the amount of adhesive that is squeezed out from between the edgebanding and the substrate.
Apply the edgebanding carefully. Avoid applying too much pressure, as this can cause the edgebanding to break.

Conclusion

Using edgebanding that is too thick can lead to a number of problems. By following the tips in this article, you can avoid these problems and ensure that your finished product is durable and attractive.

2024-12-14

Previous：Should I Use Edging on Window Frames?

Next：How to Cut Edge Banding: A Comprehensive Guide