How to Apply Pre-Glued Edge Banding22

Pre-glued edge banding is a convenient and efficient way to finish the edges of your furniture or other woodworking projects. The glue is already applied to the banding, so you don't have to worry about applying glue yourself. This can save you time and effort, and it can also help to ensure a strong bond between the banding and the substrate.

There are a few different ways to apply pre-glued edge banding. The most common method is to use a hot iron. You can also use a heat gun or a hair dryer. If you are using a hot iron, be sure to set it to a low temperature so that you don't damage the banding.

Once you have chosen your method of application, you can begin to apply the edge banding. Start by cutting the banding to the desired length. Then, apply the banding to the edge of the substrate. Be sure to align the banding carefully so that it is flush with the edge of the substrate.

Once the banding is in place, you can use a roller or a burnishing tool to press it down. This will help to ensure a strong bond between the banding and the substrate. If you are using a hot iron, you can also use a damp cloth to help set the glue.

Once the glue has set, you can trim the excess banding. You can use a sharp knife or a utility knife to do this. Be careful not to cut into the substrate.

Here are some tips for applying pre-glued edge banding:
Use a sharp knife or utility knife to cut the banding.
Be sure to align the banding carefully so that it is flush with the edge of the substrate.
Use a roller or a burnishing tool to press the banding down.
If you are using a hot iron, you can also use a damp cloth to help set the glue.
Once the glue has set, you can trim the excess banding.

By following these tips, you can ensure a successful pre-glued edge banding application.

2024-12-17

Previous：Should Drawer Bottoms and Edge Banding Be Edged?

Next：Is Tearable Edge Banding PUR Edging?