How to Remove PUR Edge Banding142

PUR edge banding is a type of edge banding that is made from polyurethane resin. It is a durable and long-lasting material that is resistant to heat, moisture, and UV light. However, it can be difficult to remove PUR edge banding if you need to replace it or make repairs.

There are a few different ways to remove PUR edge banding. One way is to use a heat gun. Heat the edge banding with the heat gun until it becomes soft and pliable. Then, use a putty knife or scraper to carefully remove the edge banding from the substrate.

Another way to remove PUR edge banding is to use a chemical stripper. Apply the chemical stripper to the edge banding and allow it to sit for the amount of time specified on the product label. Then, use a putty knife or scraper to remove the softened edge banding.

If you are having trouble removing PUR edge banding with a heat gun or a chemical stripper, you may need to use a mechanical method. This involves using a saw or a router to cut through the edge banding. Be careful when using a mechanical method, as you do not want to damage the substrate.

Once you have removed the PUR edge banding, you can clean the substrate and apply new edge banding. Be sure to follow the manufacturer's instructions for applying the new edge banding.

Here are some additional tips for removing PUR edge banding:
Wear gloves and eye protection when working with heat guns and chemical strippers.
Test the heat gun or chemical stripper on a small area of the edge banding before using it on the entire piece.
Be patient when removing the edge banding. It may take some time to soften the edge banding and remove it completely.
If you are having trouble removing the edge banding, you may need to seek professional help.

I hope this information has been helpful. Please let me know if you have any other questions.

2024-12-17

Previous：How to Apply Edge Banding with a Hot Melt Edge Bander

Next：How to Edge Band with U-shaped Edge Banding