How Much Edging Do Woodworkers Need to Edge Themselves?91

As a professional manufacturer of edge banding in China, we are committed to providing you with high-quality edge banding products and services. In addition, we can also provide you with some professional knowledge and suggestions about edge banding. When it comes to edge banding, one of the most common questions we get is: How much edging do woodworkers need to edge themselves? The answer to this question depends on a few factors, including the size of the project, the type of edge banding being used, and the method of application.

The easiest way to determine how much edging you need is to measure the length of the edges you will be banding. Once you have this measurement, you can use the following formula to calculate the amount of edging you need:

Edging Length = (Length of Edges to be Banded) + (Overhang)

The overhang is the amount of edging that will extend beyond the edge of the substrate. This is typically 1/16" to 1/8" on each side. For example, if you are banding a piece of plywood that is 48" long, you would need 48" + (1/4") = 48.25" of edging.

The type of edge banding you are using will also affect the amount you need. Some types of edge banding, such as veneer edge banding, are very thin and require less material. Other types of edge banding, such as solid wood edge banding, are thicker and require more material.

The method of application will also affect the amount of edging you need. If you are using a hand-held edge bander, you will need to allow for some waste. This is because the edge bander will trim off the excess edging as it applies the adhesive. If you are using a table-mounted edge bander, you will not need to allow for as much waste.

In general, it is always best to order a little more edging than you think you will need. This will ensure that you have enough to complete your project without having to order more. Edging is a relatively inexpensive material, so it is not a big deal if you have a little extra left over.

Here are some additional tips for determining how much edging you need:
If you are banding a curved edge, you will need to use more edging than you would for a straight edge.
If you are using a hand-held edge bander, you will need to allow for some waste.
It is always best to order a little more edging than you think you will need.

By following these tips, you can be sure that you have the right amount of edging to complete your project.

2024-12-17

Previous：How to Edge Band a Furniture Factory Edging Strip: A Step-by-Step Video Guide

Next：How to Edge Band with Wanhua Edging Strips