How to Make Beveled Edge Veneer Tape128

As a leading manufacturer of veneer edge banding in China, we understand the importance of providing high-quality products to our customers. One of our most popular products is our beveled edge veneer tape, which is used to create a seamless transition between the edge of a panel and the surface it is applied to. In this article, we will provide a step-by-step guide on how to make beveled edge veneer tape.

Materials Required

To make beveled edge veneer tape, you will need the following materials:
Veneer tape
Beveling machine
Adhesive
Roller
Trimmer

Steps

Once you have gathered all of the necessary materials, you can begin making beveled edge veneer tape by following these steps:
Prepare the veneer tape. Cut the veneer tape to the desired length and width. The length should be long enough to cover the edge of the panel plus a few inches on each side.
Bevel the edge of the veneer tape. Use the beveling machine to create a beveled edge on the veneer tape. The bevel should be angled at 45 degrees.
Apply adhesive to the beveled edge. Use a roller to apply a thin layer of adhesive to the beveled edge of the veneer tape.
Attach the veneer tape to the panel. Place the veneer tape on the edge of the panel, aligning the adhesive edge with the edge of the panel. Use a roller to press the veneer tape firmly into place.
Trim the excess veneer tape. Use a trimmer to trim the excess veneer tape from the edges of the panel.

Tips

Here are a few tips for making beveled edge veneer tape:
Use a sharp beveling machine blade to create a smooth, clean bevel.
Apply a thin, even layer of adhesive to the beveled edge.
Press the veneer tape firmly into place to ensure a secure bond.
Trim the excess veneer tape carefully to avoid damaging the panel.

Conclusion

Making beveled edge veneer tape is a relatively simple process that can be completed in a few minutes. By following the steps outlined in this article, you can create high-quality veneer tape that will add a touch of elegance to your furniture projects.

2024-12-18

Previous：Can Lacquered Boards Be Edged with Edge Banding?

Next：China Cabinet Door Edge Banding vs. Metal Frame: Which One is Better?