How to Apply High-Gloss Edging the Traditional Way368

High-gloss edging is a type of furniture edging that is characterized by its shiny, reflective surface. It is a popular choice for modern and contemporary furniture, as it can add a touch of sophistication and style to any piece. However, high-gloss edging can be tricky to apply, as it requires precise measurements and careful attention to detail.

In this guide, we will walk you through the steps of how to apply high-gloss edging the traditional way. With a little practice, you'll be able to get professional-looking results every time.

What You'll Need
High-gloss edging
Edging cutter
Iron
Edging press
Trimming tool
Sandpaper
Tack cloth

Step 1: Cut the Edging

The first step is to cut the edging to the desired length. To do this, you will need to use an edging cutter. An edging cutter is a specialized tool that is designed to cut edging material precisely. When cutting the edging, be sure to cut it slightly longer than the edge of the furniture piece. This will give you some extra material to work with when applying the edging.

Step 2: Apply the Edging

Once the edging is cut, you can begin applying it to the furniture piece. To do this, you will need to use an iron. An iron is a heated tool that is used to melt the adhesive on the back of the edging. When applying the edging, be sure to apply it evenly and smoothly. Use your hand to press the edging into place, and be sure to remove any bubbles or wrinkles.

Step 3: Trim the Edging

Once the edging is applied, you will need to trim it to the edge of the furniture piece. To do this, you will need to use a trimming tool. A trimming tool is a specialized tool that is designed to trim edging material precisely. When trimming the edging, be sure to trim it flush with the edge of the furniture piece.

Step 4: Sand the Edging

Once the edging is trimmed, you will need to sand it to smooth out any rough edges. To do this, you will need to use sandpaper. When sanding the edging, be sure to use a fine-grit sandpaper. Sand the edging in the direction of the grain, and be sure to remove any dust or debris.

Step 5: Clean the Edging

Once the edging is sanded, you will need to clean it to remove any dust or debris. To do this, you will need to use a tack cloth. A tack cloth is a sticky cloth that is used to remove dust and debris from surfaces. When cleaning the edging, be sure to wipe it down thoroughly.

2024-12-18

Previous：How to Edgeband Beveled Edges Using a Manual Edgebander

Next：How to Fix Problems with Small Edge Banding Not Sealing Properly