How to Apply Flat Edging Bands Without a Machine13

Flat edging bands are a great way to finish the edges of your furniture, giving it a professional and polished look. However, if you don't have a dedicated edge banding machine, you may be wondering how to apply them without one. Fortunately, there are a few methods you can use to get the job done.

Method 1: Using a Handheld Iron

One option is to use a handheld iron. This is a relatively simple method, but it requires some practice to get the hang of it. To use this method, you will need:A handheld iron
A flat edging band
A sharp utility knife
A damp cloth

Start by heating up the iron to its highest setting.
Place the edging band on the edge of the furniture.
Use the iron to press down on the edging band, moving it along the edge of the furniture.
As you press, use the damp cloth to wipe away any excess glue.
Once you have reached the end of the edge, use the utility knife to trim off any excess edging band.

Method 2: Using a Heat Gun

Another option is to use a heat gun. This method is a bit more dangerous than using a handheld iron, so be sure to take precautions. To use this method, you will need:A heat gun
A flat edging band
A sharp utility knife
A pair of heat-resistant gloves

Start by putting on the heat-resistant gloves.
Hold the heat gun about 6 inches away from the edging band.
Move the heat gun along the edge of the furniture, heating the edging band until it becomes pliable.
Once the edging band is pliable, press it down on the edge of the furniture.
Use the utility knife to trim off any excess edging band.

Method 3: Using Contact Cement

Finally, you can also use contact cement to apply flat edging bands. This method is a bit more permanent than the other two methods, so be sure to follow the directions carefully. To use this method, you will need:Contact cement
A flat edging band
A sharp utility knife
A paintbrush

Start by applying a thin layer of contact cement to the edge of the furniture and to the back of the edging band.
Let the contact cement dry for about 10 minutes.
Align the edging band with the edge of the furniture and press it into place.
Use the utility knife to trim off any excess edging band.

Tips for Applying Flat Edging Bands

Here are a few tips to help you get the best results when applying flat edging bands:Make sure the edge of the furniture is clean and free of dust and debris.
Use a sharp utility knife to trim the edging band. A dull knife will tear the edging band and make it difficult to apply.
Apply even pressure when pressing the edging band onto the furniture.
If you are using contact cement, be sure to follow the directions carefully and allow the cement to dry completely before pressing the edging band into place.

2024-12-19

Previous：What is the Best Edge Banding Color for White Laminate Panels?

Next：How to Edge Band 40 Boards Without Them Falling Off