How to Seal Edge Banding Corners Quickly67

As a Chinese edge banding strip factory, we have been producing and supplying edge banding strips for many years. Edge banding strips are used to cover the exposed edges of plywood, particleboard, and MDF. They can be made from a variety of materials, including PVC, ABS, and wood veneer. Edge banding strips not only improve the appearance of the workpiece but also protect the edges from damage.

One of the most important steps in applying edge banding strips is to seal the corners. If the corners are not sealed properly, they can become loose and peel off. There are a few different ways to seal edge banding corners, but the most common method is to use a hot air gun or heat iron. Heat and pressure from the hot air gun help to soften the edge banding strip, making it more pliable and easier to mold around the corner.

Here are the steps on how to seal edge banding corners quickly using a hot air gun:
Cut the edge banding strip to the desired length.
Apply a thin layer of adhesive to the back of the edge banding strip.
Position the edge banding strip on the edge of the workpiece.
Use a hot air gun to heat the edge banding strip. The temperature should be 350 to 500°F.
Press the edge banding strip into the corner using a rubber roller.
Hold the edge banding strip in place until it cools and hardens.
Trim any excess edge banding strip.

Here are some tips for sealing edge banding corners quickly:
Use a sharp knife to cut the edge banding strip. A dull knife will tear the edge banding strip and make it difficult to seal the corners.
Apply a thin layer of adhesive to the back of the edge banding strip. Too much adhesive can make the edge banding strip difficult to position and can cause it to bleed out from under the edge banding strip.
Use a hot air gun to heat the edge banding strip. The temperature should be high enough to soften the edge banding strip but not so high that it burns the edge banding strip or the workpiece.
Press the edge banding strip into the corner using a rubber roller. A rubber roller will help to evenly distribute the pressure and prevent the edge banding strip from tearing.
Hold the edge banding strip in place until it cools and hardens. This will help to ensure that the edge banding strip is properly sealed.
Trim any excess edge banding strip. A sharp knife or a utility knife can be used to trim the excess edge banding strip.

Using a hot air gun to seal edge banding corners is a quick and easy way to get a professional-looking finish. By following these tips, you can ensure that your edge banding corners are sealed properly and will last for years to come. If you have any questions, please feel free to contact us.

2024-12-19

Previous：How to Manually Apply High Gloss Edge Banding

Next：Can PET Edge Banding Be Used for Sloped Edges?