How to Round Edge U-Shaped Edge Banding41

U-shaped edge banding is a versatile and durable option for finishing the edges of furniture and other wood products. It is typically made from PVC or ABS plastic, and is available in a variety of colors and finishes. U-shaped edge banding is applied to the edge of the workpiece using a hot melt adhesive, and is then trimmed and sanded to create a smooth and finished appearance.

One of the most common challenges when using U-shaped edge banding is how to create a rounded edge on the inside of the workpiece. This can be difficult to achieve using traditional methods, such as a router or a sanding block. However, there is a specialised tool called a roundover bit that can be used to create a perfect round edge on the inside of U-shaped edge banding.

To use a roundover bit, you will need a router that is equipped with a 1/4-inch collet. The roundover bit should have a 1/4-inch cutting diameter and a 1/2-inch radius. Once you have the appropriate tools, you can follow these steps to create a round edge on the inside of U-shaped edge banding:
Apply the U-shaped edge banding to the edge of the workpiece using a hot melt adhesive.
Trim the excess edge banding using a utility knife or a flush trim bit.
Sand the edge banding to smooth the surface.
Install a roundover bit in the router.
Adjust the router so that the bit is just touching the edge of the edge banding.
Route the edge of the edge banding, using a light touch.
Sand the edge of the edge banding to smooth the surface.

Once you have completed these steps, you will have a perfectly rounded edge on the inside of the U-shaped edge banding. This technique can be used to create a variety of decorative effects, and can help to give your furniture a more finished appearance.

Here are some additional tips for working with U-shaped edge banding:
Use a sharp utility knife or flush trim bit to trim the excess edge banding.
Sand the edge banding in the direction of the grain to avoid scratching the surface.
Be careful not to overheat the edge banding when routing the round edge.
Use a dust mask when sanding the edge banding to avoid inhaling the dust.

With a little practice, you can master the technique of creating a round edge on the inside of U-shaped edge banding. This versatile technique can be used to create a variety of decorative effects, and can help to give your furniture a more finished appearance.

2024-12-19

Previous：How to Edgeband with Acrylic Bicolor Edge Banding

Next：How to Install Wire Molding Edge Trim: Step-by-Step Guide