How to Edgeband Drawer Fronts with U-Shaped Edging22

Edgebanding is an essential part of furniture making, as it protects the edges of plywood or MDF boards and gives them a finished look. When it comes to drawers, U-shaped edging is a popular choice, as it provides a strong and durable seal against moisture and wear. In this guide, we will walk you through the step-by-step process of edging a drawer front with U-shaped edgebanding.

Materials You Will Need* U-shaped edgebanding (preferably PVC or ABS)
* Edgebanding trimmer
* Edgebander
* Hot melt glue gun
* Trim bit
* Router
* Sandpaper
* Tack cloth

Step 1: Prepare the Drawer Front* Cut the drawer front to the desired size and shape.
* Sand the edges of the drawer front to remove any splinters or rough spots.
* Clean the edges of the drawer front with a tack cloth to remove any dust or debris.

Step 2: Cut the Edgebanding* Measure the length of the drawer front's edges.
* Cut the edgebanding into strips that are slightly longer than the measured length.
* Trim the ends of the edgebanding strips at a 45-degree angle using an edgebanding trimmer.

Step 3: Apply Hot Melt Glue* Apply a thin layer of hot melt glue to the inside of the U-shaped edgebanding strip.
* Align the edgebanding strip with the edge of the drawer front and press it firmly into place using a flat tool, such as a piece of wood or a metal spatula.
* Hold the edgebanding in place for a few seconds until the glue has cooled and set.

Step 4: Trim the Edgebanding* Once the glue has set, trim the excess edgebanding from the top and bottom edges of the drawer front using an edgebander.
* Be sure to use a sharp trim bit and set the depth of the router so that it only trims the excess edgebanding and does not cut into the drawer front.

Step 5: Sand and Clean* Sand the edges of the drawer front to smooth out any rough edges or excess glue.
* Clean the edges of the drawer front with a tack cloth to remove any dust or debris.

Tips for Edging Drawer Fronts with U-Shaped Edging* Use high-quality edgebanding that is designed for furniture use.
* Apply a thin layer of glue to the edgebanding to ensure a strong bond.
* Press the edgebanding firmly into place and hold it until the glue has set.
* Trim the edgebanding carefully to avoid cutting into the drawer front.
* Sand and clean the edges of the drawer front to achieve a smooth and finished look.
By following these steps, you can successfully edgeband drawer fronts with U-shaped edging and create a durable and professional-looking finish.

2024-12-19

Previous：What Type of Edging Is Best for Balcony Enclosures?

Next：How to Edge Band Kitchen Cabinet Panels: Step-by-Step Guide with Images