How to Seal Drawer Edging Strips Properly302

Drawer edging strips are an important part of furniture construction, as they provide a finished look to the edges of drawers and help to keep them from becoming damaged. However, if edging strips are not sealed properly, they can come loose or become damaged, which can lead to problems with the drawer's appearance and function.

There are a few different ways to seal drawer edging strips, but the most common and effective method is to use a hot melt adhesive. Hot melt adhesives are applied to the edge of the edging strip and then heated, which causes them to melt and flow into the pores of the wood. This creates a strong bond between the edging strip and the drawer, which will help to keep it in place and prevent it from becoming damaged.

To seal drawer edging strips with a hot melt adhesive, you will need the following supplies:
Hot melt adhesive
Hot melt adhesive applicator
Edging strips

Once you have gathered your supplies, you can follow these steps to seal the edging strips:1. Prepare the edging strips by cleaning them with a damp cloth and then drying them thoroughly.

2. Apply a thin bead of hot melt adhesive to the edge of the edging strip.

3. Heat the adhesive with the hot melt adhesive applicator.

4. Press the edging strip into place on the drawer.

5. Hold the edging strip in place for a few seconds to allow the adhesive to cool and set.

6. Repeat steps 2-5 for all of the edging strips on the drawer.

Once the edging strips have been sealed, they will be securely attached to the drawer and will help to protect it from damage. However, it is important to note that hot melt adhesives can be difficult to remove, so it is important to be careful when applying them.

If you are not comfortable using a hot melt adhesive, there are other methods that you can use to seal drawer edging strips. However, these methods may not be as effective as using a hot melt adhesive.

One alternative method is to use a wood glue. Wood glue is applied to the edge of the edging strip and then allowed to dry. However, wood glue can take a long time to dry, and it may not be as strong as a hot melt adhesive.

Another alternative method is to use a nail gun. Nails can be used to secure the edging strip to the drawer, but this method can be time-consuming and may not be as effective as using a hot melt adhesive or wood glue.

No matter which method you choose to use, it is important to make sure that the edging strips are sealed properly. This will help to keep them in place and prevent them from becoming damaged.

2024-12-19

Previous：How to Troubleshoot Incorrectly Applied Edge Banding on Chinese Furniture

Next：How to Apply Bicolor Edging on Woodwork