How to Apply 100mm Edge Banding116

Edge banding is a thin strip of material that is applied to the edges of a workpiece to create a finished look and protect the core material from moisture and damage. Edge banding comes in a variety of materials, including wood, plastic, and metal, and can be applied using a variety of methods. In this article, we will discuss how to apply 100mm edge banding using a hot melt adhesive.

Before you begin, you will need to gather the following materials:
100mm edge banding
Hot melt adhesive
Edge banding trimmer
Sandpaper
Tack cloth

Once you have gathered your materials, you can begin the process of applying the edge banding.

Step 1: Prepare the workpiece

The first step is to prepare the workpiece by sanding the edges to remove any splinters or rough spots. Once the edges are sanded, wipe them down with a tack cloth to remove any dust or debris.

Step 2: Apply the hot melt adhesive

Apply a thin layer of hot melt adhesive to the edge of the workpiece using a glue gun. Be careful not to apply too much adhesive, as this can make it difficult to apply the edge banding.

Step 3: Apply the edge banding

Place the edge banding on the edge of the workpiece and press it down firmly. Use a rolling pin or a J-roller to apply even pressure and ensure that the edge banding is fully adhered to the workpiece.

Step 4: Trim the edge banding

Once the edge banding is applied, use an edge banding trimmer to trim the excess material. Be careful not to trim too much material, as this can leave the edge of the workpiece exposed.

Step 5: Sand the edge banding

Sand the edge banding to smooth the edges and remove any excess adhesive. Start with a coarse sandpaper and gradually work your way to a finer sandpaper.

Step 6: Finish the edge banding

You can finish the edge banding by applying a clear coat of varnish or lacquer. This will help to protect the edge banding from damage and give it a polished look.

Applying edge banding is a relatively simple process that can be completed in a few steps. By following the steps outlined in this article, you can achieve a professional-looking finish that will protect your workpiece from moisture and damage.

2024-12-19

Previous：Which Position is More Secure for Door Frame Edge Banding?

Next：How to Fix White Residue on PVC Edge Banding