How to Install Edge Banding to a Door Threshold186

Edge banding is a thin strip of material used to cover the exposed edges of a piece of wood or other material. It is used to protect the edges from moisture and other damage, and to give the piece a more finished look. There are many different types of edge banding available, each with its own unique advantages and disadvantages. In this article, we will discuss how to install edge banding to a door threshold, using a type of edge banding known as a "door threshold transition strip".

Materials
Door threshold transition strip
Measuring tape
Pencil or marking knife
Utility knife
Adhesive (optional)
Hammer or rubber mallet
Nail set (optional)

Instructions
Measure the length of the door threshold and cut the transition strip to the same length.
Place the transition strip on top of the door threshold, aligning the edge of the strip with the edge of the threshold.
Use a pencil or marking knife to trace the outline of the strip onto the threshold.
Remove the transition strip and apply adhesive to the back of the strip, if desired.
Realign the transition strip with the outline on the threshold and press it into place.
Use a hammer or rubber mallet to tap the strip into place.
If desired, use a nail set to drive nails through the pre-drilled holes in the strip.

Tips

When choosing an adhesive, be sure to select one that is compatible with the material of the door threshold and the transition strip.
If you are not using adhesive, be sure to press the strip firmly into place so that it will stay in position.
If you are nailing the strip into place, be sure to use nails that are the correct size for the job.
Once you have installed the transition strip, be sure to trim any excess material from the ends of the strip.

Installing a door threshold transition strip is a simple and straightforward task that can be completed in a matter of minutes. By following the instructions above, you can easily protect your door threshold from damage and give it a more finished look.

2024-12-19

---

Previous：How to Install Edge Banding with a Hand-held Trimmer

Next：How to Edge Band a Curved Surface with High Gloss Edge Banding