Which Edge Banding Requires Heat for Application?104

When it comes to edge banding, there are two main types: hot melt and pre-glued. Hot melt edge banding requires heat to activate the adhesive, while pre-glued edge banding has a pre-applied adhesive that is activated by pressure. In this article, we will discuss which edge banding requires heat for application and the pros and cons of each type.

Hot Melt Edge Banding

Hot melt edge banding is a type of edge banding that requires heat to activate the adhesive. The adhesive is typically applied to the edge of the substrate using a heated roller or iron. Once the adhesive is activated, the edge banding is pressed onto the substrate and held in place until the adhesive cools and bonds.

Hot melt edge banding is a good choice for applications where a strong bond is required. It is also a good choice for applications where the edge banding will be exposed to heat or moisture. However, hot melt edge banding can be more difficult to apply than pre-glued edge banding, and it requires specialized equipment.

Pre-Glued Edge Banding

Pre-glued edge banding is a type of edge banding that has a pre-applied adhesive. The adhesive is typically activated by pressure, so no heat is required. Pre-glued edge banding is simply pressed onto the substrate and held in place until the adhesive bonds.

Pre-glued edge banding is a good choice for applications where a quick and easy installation is required. It is also a good choice for applications where the edge banding will not be exposed to heat or moisture. However, pre-glued edge banding may not be as strong as hot melt edge banding, and it may not be suitable for applications where a high bond strength is required.

Which Edge Banding Is Right for You?

The type of edge banding that you choose will depend on the specific application. If you need a strong bond and the edge banding will be exposed to heat or moisture, then hot melt edge banding is a good choice. If you need a quick and easy installation and the edge banding will not be exposed to heat or moisture, then pre-glued edge banding is a good choice.

Here is a table that summarizes the pros and cons of each type of edge banding:| Feature | Hot Melt Edge Banding | Pre-Glued Edge Banding |
|---|---|---|
| Bond strength | Strong | Weaker |
| Heat resistance | Good | Poor |
| Moisture resistance | Good | Poor |
| Ease of installation | Difficult | Easy |
| Cost | More expensive | Less expensive |

2024-12-21

---

Previous：Edgebanding vs. Moulding: Which Is Better for Your Home Decor?

Next：Can Cabinet Doors be Edge Banded?