How to Install a Door Edge Banding Strip149

Door edge banding strips are a great way to add a finished look to your doors. They can also help to protect the edges of your doors from damage. Installing door edge banding strips is a relatively easy process that can be completed in a few hours.

Materials you will need:* Door edge banding strips
* Contact cement
* Utility knife
* Sandpaper
* Measuring tape
* Pencil

Instructions:1. Measure and cut the door edge banding strips to the length of the door edge.
2. Apply a thin layer of contact cement to the back of the door edge banding strip and to the edge of the door.
3. Align the door edge banding strip with the edge of the door and press it into place.
4. Use a utility knife to trim any excess door edge banding strip.
5. Sand the edges of the door edge banding strip to smooth them out.

Tips:* Use a sharp utility knife to cut the door edge banding strips. This will help to ensure a clean cut.
* Apply the contact cement evenly to the back of the door edge banding strip and to the edge of the door. This will help to ensure a strong bond.
* Press the door edge banding strip into place firmly. This will help to ensure that it adheres properly.
* Sand the edges of the door edge banding strip to smooth them out. This will help to give the door a finished look.

Troubleshooting:* If the door edge banding strip is not adhering properly, you may need to apply more contact cement.
* If the door edge banding strip is too long, you can trim it with a utility knife.
* If the door edge banding strip is too short, you can add a piece of wood to the end of the door and then apply the door edge banding strip to the wood.

2024-12-22

Previous：How to Trim Hand-Applied Edge Banding for a Clean and Professional Finish

Next：Understanding How to Cope with Unfinished Edgebanding