How to Install Edge Banding on Wardrobe Trims235

Edge banding is a thin strip of material that is applied to the exposed edges of plywood or MDF boards. It serves both a functional and decorative purpose, protecting the edges of the board from damage and giving it a finished look. Installing edge banding on wardrobe trims is a relatively straightforward process, but it does require some precision and care.

Materials and Tools* Edge banding material
* Matching wood glue
* Sharp utility knife
* Edge banding trimmer
* Smoothing iron
* Sandpaper

Steps1. Prepare the edge of the board. The edge of the board should be clean, smooth, and free of any dust or debris. Use a sharp utility knife to trim away any excess material or splinters.
2. Apply wood glue to the edge of the board. Use a thin, even layer of wood glue to the edge of the board. Be sure to spread the glue all the way to the edge, but do not let it get onto the surface of the board.
3. Apply the edge banding. Carefully align the edge banding with the edge of the board and press it into place. Use a smoothing iron to heat the edge banding and activate the glue. The heat will help to soften the banding and make it easier to adhere to the board.
4. Trim the excess edge banding. Use an edge banding trimmer to trim away the excess banding from both ends of the board. Be sure to trim the banding flush with the surface of the board.
5. Sand the edge banding. Use sandpaper to smooth the edge banding and make it flush with the surface of the board. Sanding will also help to remove any excess glue or imperfections.
6. Finish the edge banding. If desired, you can finish the edge banding with a clear coat of varnish or polyurethane. This will help to protect the banding from wear and tear and give it a glossy finish.

Tips* Use a sharp utility knife to trim the edge of the board. A dull knife can tear or chip the board, making it difficult to apply the edge banding.
* Apply a thin, even layer of wood glue to the edge of the board. Too much glue can make it difficult to apply the edge banding and can cause the banding to bubble or peel.
* Use a smoothing iron to heat the edge banding and activate the glue. The heat will help to soften the banding and make it easier to adhere to the board.
* Trim the excess edge banding flush with the surface of the board. Overhanging banding can be unsightly and can make it difficult to apply the finish.
* Sand the edge banding to smooth it and make it flush with the surface of the board. Sanding will also help to remove any excess glue or imperfections.
* Finish the edge banding with a clear coat of varnish or polyurethane. This will help to protect the banding from wear and tear and give it a glossy finish.

2024-12-22

Previous：Which Edgebander Trimmer to Choose for Your Edgebanding Process

Next：How to Trim Edge Banding with a Trimmer