How to Install Edge Banding on a Round Table44

Edge banding is a thin strip of material that is applied to the edges of a table to create a finished look and protect the core material from moisture and wear. Installing edge banding on a round table can be more challenging than installing edge banding on a straight table, but it is still a relatively simple process that can be completed in a few hours.

Materials you will need:* Edge banding with glue
* Utility knife or scissors
* Flush trim bit
* Router
* Sandpaper
* Sanding block
* Tack cloth

Instructions:1. Start by cleaning the edge of the table that you will be applying the edge banding to. Remove any dirt, dust, or debris with a tack cloth.
2. Cut the edge banding to the desired length. If you are using self-adhesive edge banding, you can simply peel off the backing and apply it to the table. If not, you will need to apply glue to the back of the edge banding before applying it to the table.
3. Once the edge banding is in place, use a flush trim bit to trim off any excess material.
4. Sand the edge of the table to smooth any rough edges.
5. Apply a coat of polyurethane or other clear finish to the edge of the table to protect the edge banding from wear and tear.

Tips:* If you are using self-adhesive edge banding, make sure to apply it carefully to avoid any wrinkles or bubbles.
* If you are using glue-on edge banding, use a thin, even coat of glue to avoid any mess or excess glue squeeze-out.
* If you are not comfortable using a flush trim bit, you can use a sharp utility knife or scissors to trim off any excess edge banding.
* Be sure to sand the edge of the table thoroughly to smooth any rough edges.
* Apply a thin coat of polyurethane or other clear finish to the edge of the table to protect the edge banding from wear and tear.

2024-12-23

Previous：Which Thickness of Edge Banding is Suitable for Small Edge Banding Machines?

Next：[Video Guide] How to Install Wardrobe Edging Trim Like a Pro