How to Install Laser Edging Strips from AEH201

Thank you for choosing AEH laser edging strips for your furniture edging needs. Our high-quality strips are designed to provide a durable and aesthetically pleasing finish to your furniture. This guide will provide you with step-by-step instructions on how to install our laser edging strips.

Tools and Materials

Before you begin, you will need the following tools and materials:- AEH laser edging strips
- Adhesive (e.g., contact cement or hot melt glue)
- Scissors or a utility knife
- Sandpaper or a sanding block
- Measuring tape
- Pencil or marking tool
- Clean cloth or sponge

Step 1: Prepare the Furniture Surface

Begin by cleaning the surface of your furniture where the edging strip will be applied. Remove any dirt or debris and ensure the surface is smooth and free of unevenness.

Step 2: Apply Adhesive to the Furniture Surface

Apply a thin layer of adhesive evenly to the surface of the furniture where the edging strip will be placed. Follow the manufacturer's instructions for the type of adhesive you are using.

Step 3: Position the Edging Strip

Carefully align the edging strip with the edge of the furniture and press it firmly into place. Ensure that the strip is flush with the surface and there are no gaps or overhangs.

Step 4: Secure the Edging Strip

Use a clean cloth or sponge to apply pressure along the entire length of the edging strip. This will help to secure the strip to the surface and remove any excess adhesive.

Step 5: Trim the Edging Strip

Once the edging strip is secured, use scissors or a utility knife to trim any excess material at the ends. Be careful not to damage the strip or the furniture.

Step 6: Sand and Finish

Lightly sand the edges of the edging strip to remove any rough edges or splinters. This will ensure a smooth and professional-looking finish.

Tips

Here are a few tips to help you achieve the best results when installing AEH laser edging strips:- Use a sharp blade for cutting the edging strip to prevent tearing or ragged edges.
- If you are applying hot melt glue, hold the edging strip in place for a few seconds until the glue sets.
- Remove any excess adhesive immediately with a clean cloth.
- Allow the adhesive to dry completely before using the furniture.

Conclusion

By following these instructions, you can easily install AEH laser edging strips on your furniture. These high-quality strips will enhance the appearance and durability of your furniture, providing a professional and polished look.

2024-12-23

Previous：Can Handheld Edging Machines Use ABS Edging?

Next：Which Thickness of Edge Banding is Suitable for Small Edge Banding Machines?