How to Remove Edge Banding Glue24

Edge banding is a thin strip of material, typically wood or plastic, that is applied to the edges of plywood or particle board to give it a more finished look. The edge banding is held in place with a strong adhesive, which can be difficult to remove if you need to make repairs or replace the edge banding.

There are a few different ways to remove edge banding glue. The most common method is to use a heat gun. Hold the heat gun about 6 inches away from the edge banding and move it back and forth until the glue starts to melt. Be careful not to hold the heat gun too close to the edge banding, as this can damage the material.

Once the glue has melted, you can use a putty knife or a scraper to remove the edge banding. Start at one end of the edge banding and work your way towards the other end. Be careful not to gouge the plywood or particle board underneath.

If you don't have a heat gun, you can also use a chemical stripper to remove edge banding glue. Apply the stripper to the edge banding and let it sit for the amount of time specified on the product label. Once the stripper has had time to work, you can use a putty knife or a scraper to remove the edge banding.

Be sure to wear gloves and eye protection when using a chemical stripper, as it can be harmful if it comes into contact with your skin or eyes.

Once you have removed the edge banding, you can clean the surface of the plywood or particle board with a damp cloth. Be sure to allow the surface to dry completely before applying new edge banding.

Here are some additional tips for removing edge banding glue:
If the edge banding is very thin, you may be able to remove it without using heat or chemicals. Simply use a sharp knife to score the glue line and then pry the edge banding off with a putty knife.
If the edge banding is made of a thick material, such as wood, you may need to use a saw to cut through the glue line before you can remove the edge banding.
Be patient when removing edge banding glue. It can take some time to remove all of the glue, especially if the glue has been on for a long time.

2024-12-23

Previous：How to Fix Edge Banding Not Sticking

Next：How to Disassemble an Edge Banding Trimmer