How to Remove Cabinet Edging152

IntroductionAs a leading Chinese furniture edging strip manufacturer, we often encounter customers who need to remove cabinet edging strips. Whether you're replacing damaged edging or simply updating your cabinet's appearance, removing edging strips can be a relatively straightforward task if you have the right tools and knowledge.

Materials You'll NeedBefore you begin, gather the following materials:* Utility knife
* Putty knife
* Heat gun or hairdryer
* Solvent or mineral spirits
* Soft cloth
* Safety glasses

Step 1: Preparation* Wear safety glasses to protect your eyes from flying debris.
* Open windows or use a fan to ventilate the area, as solvents can produce strong fumes.
* If using a heat gun, set it to a low temperature to avoid damaging the cabinet finish.

Step 2: Remove Adhesive* Apply heat to the edging strip using a heat gun or hairdryer. This will soften the adhesive and make it easier to remove.
* Slide the putty knife gently under the edging strip to loosen the adhesive.
* Continue applying heat and using the putty knife to remove the edging strip. Be careful not to damage the cabinet surface.

Step 3: Clean Surface* Once the edging strip is removed, use a soft cloth dampened with solvent or mineral spirits to remove any remaining adhesive.
* Allow the surface to dry completely before applying new edging.

Step 4: Install New Edging* Apply a thin layer of adhesive to the edge of the cabinet.
* Press the new edging strip into place and use a roller or block to ensure it adheres properly.
* Trim any excess edging with a utility knife.

Tips* If the edging strip is particularly stubborn, you may need to use a stronger solvent such as acetone. However, be sure to test the solvent on an inconspicuous area to ensure it does not damage the finish.
* If you are removing a large amount of edging, consider using a power tool such as a reciprocating saw or router. However, take extra precautions to prevent damaging the cabinet surface.
* Be patient and work slowly to avoid damaging the cabinet or the new edging.

ConclusionRemoving cabinet edging strips is a task that can be completed with a few simple tools and techniques. By following these steps, you can safely and effectively remove old edging and install new edging to update the appearance of your cabinets.

2024-12-26

Previous：How to Bend Edge Banding for Curved Surfaces

Next：How to Fix Gaps in PVC Edge Banding on Curved Surfaces