How Wooden Edge Banding Strips Are Made46

Wooden edge banding strips are a type of decorative trim used to cover the exposed edges of plywood, MDF, or other types of wood panels. They come in a variety of wood species, colors, and finishes, and can be used to create a seamless and finished look to any woodworking project.

The process of making wooden edge banding strips begins with the selection of the wood. The most common wood species used for edge banding are oak, maple, cherry, and walnut. These woods are chosen for their durability, grain pattern, and color.

Once the wood has been selected, it is cut into thin strips. The strips are typically 1/4 inch wide and 1/8 inch thick. The length of the strips will vary depending on the size of the project.

The next step is to apply a veneer to the strips. The veneer is a thin layer of wood that is applied to the surface of the strips to give them a finished look. The veneer is typically made from the same wood species as the strips, but it can also be made from a different wood species to create a contrasting effect.

Once the veneer has been applied, the strips are sanded to smooth the surface. The strips are then cut to the desired length and mitered at the corners. The miters are then glued together to create a seamless joint.

The final step is to apply a topcoat to the strips. The topcoat can be a clear finish, such as polyurethane, or it can be a colored finish, such as paint or stain. The topcoat will protect the strips from wear and tear.

Wooden edge banding strips are a versatile and affordable way to add a finished look to any woodworking project. They are easy to install and can be used to create a variety of looks.

Installation Tips

When installing wooden edge banding strips, it is important to use a sharp blade to cut the strips to the desired length. A dull blade can tear the wood and create a rough edge. It is also important to use a miter saw to cut the miters at the corners. A miter saw will ensure that the miters are cut at a precise angle, which will create a seamless joint.

When gluing the strips together, it is important to use a thin layer of glue. Too much glue can squeeze out of the joint and create a mess. It is also important to clamp the strips together until the glue has dried. This will help to ensure that the joint is strong and durable.

Once the glue has dried, the strips can be sanded to smooth the surface. The strips can then be painted, stained, or left natural. Wooden edge banding strips are a great way to add a finished look to any woodworking project.

2024-10-03

Previous：How to Make Woodworking Edge Banding: A Step-by-Step Guide

Next：How to Install Solid Wood Edge Banding for Cabinets