How to Bend Edge Banding Around Corners209

Edge banding is a thin strip of material that is applied to the edges of furniture or other woodworking projects to give them a finished look. While edge banding is typically applied in straight lines, it can also be bent around corners to create a smooth, curved edge. Bending edge banding can be a bit tricky, but with the right technique, it is definitely possible.

There are a few different methods that can be used to bend edge banding. One common method is to use a heat gun to heat the edge banding until it becomes pliable. Once the edge banding is pliable, it can be bent around the corner and held in place until it cools and hardens. Another method for bending edge banding is to use a bending iron. A bending iron is a specialised tool that is designed to heat and bend edge banding quickly and easily. Whichever method you choose, it is important to be careful not to overheat the edge banding, as this can cause it to burn or melt.

Once the edge banding has been bent around the corner, it can be trimmed to the desired length and then glued in place. Using a sharp utility knife, trim any excess edge banding from the ends of the corner. Then, apply a thin layer of wood glue to the back of the edge banding and press it firmly into place. Once the glue has dried, the edge banding will be securely attached to the corner.

Here are some tips for bending edge banding around corners:
Use a sharp utility knife to cut the edge banding to the desired length.
If using a heat gun, heat the edge banding until it becomes pliable but not too hot.
If using a bending iron, follow the manufacturer's instructions for heating and bending the edge banding.
Bend the edge banding around the corner and hold it in place until it cools and hardens.
Trim any excess edge banding from the ends of the corner.
Apply a thin layer of wood glue to the back of the edge banding and press it firmly into place.
Once the glue has dried, the edge banding will be securely attached to the corner.

With a little practice, you can master the technique of bending edge banding around corners. This skill will allow you to create beautiful, professional-looking furniture and other woodworking projects.

2024-12-29

Previous：How to Cut Aluminum Edging Strips

Next：How to Edge Band Deformed Boards: A Practical Guide