How to Remove Glass from a Veneer Edge Banding39

Veneer edge banding is a type of furniture trim that is made of a thin layer of wood veneer that is glued to the edge of a piece of furniture. Glass can be added to the edge banding for a decorative touch. However, if you need to remove the glass, it is important to do so carefully to avoid damaging the veneer.

Here are the steps on how to remove glass from a veneer edge banding:
Gather your materials. You will need a sharp knife, a putty knife, and a hammer.
Score the glass. Use the sharp knife to score a line around the edge of the glass. This will help to weaken the glue that is holding the glass in place.
Insert the putty knife. Insert the putty knife into the score line and gently pry up the glass. Be careful not to damage the veneer.
Remove the glass. Once the glass is loose, you can remove it by hand.
Clean the edge banding. Use a damp cloth to clean the edge banding and remove any remaining glue.

Here are some additional tips for removing glass from veneer edge banding:
If the glass is particularly stubborn, you can use a heat gun to soften the glue. Be careful not to overheat the veneer.
If you are having difficulty prying up the glass, you can try using a hammer and chisel. Place the chisel against the edge of the glass and tap it gently with the hammer.
Once you have removed the glass, be sure to clean the edge banding and apply a new coat of glue before reattaching the glass.

2024-12-31

Previous：How to Install Wardrobe Edging Strips

Next：How to Install Kitchen Countertops Trim Molding: A Step-by-Step Guide