How to Install Wardrobe Edging Strips by Hand212

As a leading furniture edging strip manufacturer in China, we have years of experience in producing and supplying high-quality edging strips for various furniture applications. One common and practical method for finishing the edges of wardrobes is to use manual edging strips. Here's a comprehensive guide on how to install wardrobe edging strips by hand:

Materials Required:* Wardrobe edging strips
* Mitre saw or hand saw
* Sandpaper or sanding sponge
* Tack nails or a pneumatic nailer
* Measuring tape
* Pencil or marking tool
* Rubber mallet or hammer

Step-by-Step Instructions:

1. Prepare the Wardrobe Edges:

* Ensure the edges of the wardrobe are clean, smooth, and free from any debris.
* Use sandpaper or a sanding sponge to lightly sand the edges for better adhesion.

2. Measure and Cut Edging Strips:

* Measure the length of each edge to be covered.
* Cut the edging strips to the required lengths using a mitre saw or hand saw.
* Cut a 45-degree angle on one end of each strip to create mitered corners for a seamless finish.

3. Apply Edging Strips:

* Place the edging strip along the edge of the wardrobe, aligning it flush with the surface.
* Use tack nails or a pneumatic nailer to secure the strip in place at regular intervals (approximately every 10-15 cm).
* Tap the nails gently using a rubber mallet or hammer to avoid damaging the strip.

4. Join Mitered Corners:

* For the mitered corners, place one strip against the other at a 45-degree angle, forming a 90-degree corner.
* Secure the corner using tack nails or a pneumatic nailer.
* Use a rubber mallet or hammer to gently tap in the nails, ensuring the corner is held firmly in place.

5. Trim Excess Material:

* Once the edging strips are installed around the edges of the wardrobe, use a utility knife or sharp scissors to trim any excess material that extends beyond the surface.
* Ensure the edges are flush with the wardrobe for a clean and professional finish.

6. Finishing Touches:

* Inspect the installed edging strips and check for any gaps or unevenness.
* If necessary, apply additional tack nails or glue to secure the strips firmly in place.
* Use sandpaper or a sanding sponge to lightly sand the edges of the edging strips, blending them seamlessly with the wardrobe surface.

Tips for Successful Installation:* Use high-quality edging strips that match the color and finish of your wardrobe.
* Cut the edging strips accurately to ensure a precise fit and avoid gaps.
* Secure the strips firmly using tack nails or a pneumatic nailer to prevent them from detaching over time.
* Take your time and be patient during the installation process to achieve optimal results.
* If desired, you can apply a thin layer of wood glue to the edges before installing the edging strips for enhanced adhesion.
By following these step-by-step instructions and tips, you can successfully install wardrobe edging strips by hand, giving your furniture a professional and finished look while protecting the edges from damage and wear.

2025-01-03

---

Previous：How to Install an Edgebander Trimmer

Next：Why Use Edge Banding on Tables?