How to Create Curved Edge Banding for Cabinetry7

Curved edge banding is a great way to add a touch of elegance and sophistication to your cabinetry. It can be used on a variety of different cabinet styles, from traditional to contemporary. If you're looking to add a unique touch to your cabinetry, curved edge banding is a great option.

There are a few different ways to create curved edge banding. One method is to use a router with a curved guide. Another method is to use a bending machine. If you're not comfortable using either of these methods, you can also purchase pre-curved edge banding.

In this article, we'll discuss the steps on how to create curved edge banding using a router with a curved guide. If you're using a bending machine or pre-curved edge banding, the process will be similar.

Materials you'll need:* Cabinetry
* Edge banding
* Router
* Curved guide
* Wood glue
* Clamps
* Sandpaper
* Tack cloth
* Iron (optional)

Instructions:1. Prepare the cabinetry. The first step is to prepare the cabinetry for the edge banding. This involves cleaning the surface of the cabinetry and removing any dust or debris. You'll also need to make sure that the surface is smooth and free of any imperfections.
2. Apply the wood glue. Once the cabinetry is prepared, you can apply the wood glue to the edge of the cabinetry. Be sure to apply the glue evenly and thinly.
3. Attach the edge banding. Once the wood glue is applied, you can attach the edge banding to the cabinetry. Start by aligning the edge banding with the edge of the cabinetry. Then, use the clamps to hold the edge banding in place.
4. Route the edge banding. Once the edge banding is attached, you can use the router to round over the edge. Be sure to use a curved guide to create a smooth, even curve.
5. Sand the edge banding. Once the edge banding is routed, you can sand it to remove any rough edges. Be sure to use a fine-grit sandpaper to avoid scratching the edge banding.
6. Clean the edge banding. Once the edge banding is sanded, you can clean it with a tack cloth to remove any dust or debris.
7. Apply the finish (optional). If you want to give the edge banding a finished look, you can apply a clear finish. This will help to protect the edge banding and give it a glossy shine.

Tips:* If you're using a bending machine, be sure to follow the manufacturer's instructions carefully.
* If you're using pre-curved edge banding, be sure to measure the edge of the cabinetry before you purchase the edge banding.
* If you're not comfortable using a router, you can hire a professional to do it for you.
* Be sure to use a sharp router bit to create a clean, even cut.
* Use a light touch when routing the edge banding to avoid chipping or splintering.
* Sand the edge banding lightly to avoid removing the finish.
* Clean the edge banding thoroughly before applying the finish.

2024-10-04

Previous：How to Remove Aluminum Edge Banding

Next：How to Install Porcelain Tile Edge Trim [Video Guide]